Search This News

Monday, July 31, 2017

Color Filter Set for HERO5

INON INC. is pleased to announce official release of  "Color Filter Set for HERO5" specifically designed for GoPro® optional genuine "Super Suits Dive Housing for HERO5 Black" on August 3, 2017.

Color Filter Set for HERO5
--Release date: August 3, 2017
--JAN Code: 456212143 846 0

Color Filter Set for HERO5
Left: Pink Filter (for use in green water)
Center: Orange Filter (for use at depth up to 15m)
Right: Red Filter (for use at depth 15m or deeper)




Different Color Filter Set for HERO5 installed in HERO5 Black/Super Suits Dive housing for HERO5 Black
Left: Pink Filter (for use in green water)
Center: Orange Filter (for use at depth up to 15m)
Right: Red Filter (for use at depth 15m or deeper)


■ Color Filter Set for HERO5 Features ■

The "Color Filter Set for HERO5" is specifically designed for combination of GoPro® HERO5 and its optional genuine housing "Super Suits Dive housing for HERO5 Black" to put it in the lens port of the dive housing to reproduce natural color with less blue cast. The set consists of three different filters for ; green water, shallow water (up to 15m) or deep water (15m or beyond) to use different shooting conditions

The filters are designed to fit inside of housing lens port to use with INON GoPro® compatible accessory "SD Front Mask for HERO5" to have full benefit of innovative INON quality attachment lenses "UFL-G140 SD" underwater semi-fisheye lens and "UCL-G165 SD" underwater wide close-up lens.


Color Filter is set inside of housing lens port



Left: Pink Filter (for green water) installed with SD Front Mask for HERO5/UFL-G140 SD
Right: Pink Filter (for green water) installed with SD Front Mask for HERO5/UCL-G165 SD


■ Camera/housing Compatibility ■

HERO5 Black + Optional  Super Suits Dive Housing for HERO5 Black


■ Sample Image ■

Orange Filter (for shallow water up to 15m)


Left: Without color filter
Right: With Orange Filter (for shallow water up to 15m)
--Equipment: HERO5 Black
--Photo data: WB Auto
--Photo by: R. Hattori@INON, "Monshita (at 10m depth)" Osezaki, Shizuoka, Japan


July 31, 2017
INON INC.

* GOPRO, HERO, are trademarks or registered trademarks of GoPro, Inc.

*Press release information is as of July 31, 2017 and subject to change without prior notice.

Tuesday, July 11, 2017

SD Front Mask for HERO5

INON INC. is pleased to announce official release of "SD Front Mask for HERO5" on July 15, 2017. to attach INON SD Mount series attachment lens, arm etc. on the optional genuine dive housing "Super Suits" for GoPro® HERO5.

SD Front Mask for HERO5
--Release date: July 15, 2017
--JAN Code: 456212143 845 3

SD Front Mask for HERO5,
packaged Mount Adapter for SD Front Mask and GoPro® Male Adapter


Left: SD Front Mask for HERO5 installed on the Dive housing / HERO5 BLACK
Right: SD Front Mask for HERO5



Rear view of the Dive housing / HERO5 BLACK
installed with the SD Front Mask for HERO5



■ SD Front Mask for HERO5 Features ■

  • Specifically designed for the genuine GoPro® "Dive housing for HERO5 BLACK".
  • Easy to install to snap on the front of the housing and fix with a thumbscrew.
  • Equipped with INON "SD Mount" bayonet system with locking feature to support easy and speedy exchange as well as reliable installation of compatible SD Mount lenses. Of course the SD Front Mask for HERO5 is usable without any attachment lens (*1)
  • INON "Direct Base III", "Z Joint" or "Z Adapter MV" can be attached on the bottom of the SD Front Mask for HERO5.
  • Installing packaged Male Adapter (GoPro®) on the bottom of this product utilizes your GoPro® compatible accessories.
  • Packaged "Mount Adapter for SD Front Mask" enables to add the optional INON "D Holder" on the left side of the bottom of this product.
  • The "Mount Adapter" is equipped with a tripod screw hole (1/4 in) to attach the SD Front Mask for HERO5 on a tripod or monopod.


SD Front Mask for HERO5 specifications
Size
(including protruded parts)
67.9mm/2.7in (Width), 82.3mm/3.2in (Height)
39mm/1.5in (Depth)
Weigh 40g/1.4oz (air), approx. 15g/0.5oz (underwater)
Material/surface finishing Polycarbonate, POM etc.


Compatible Lens

UFL-G140 SD Underwater Semi-fisheye Conversion Lens (*2)(*4)
--Available in the market
--JAN code: 456212143 773 9


UCL-G165 SD Underwater Wide Close-up Lens (*3)(*4)
--Available in the market
--JAN code: 456212143 772 2

Left: UFL-G140 SD installed on the SD Front Mask for HERO5
Right: UCL-G165 SD installed on the SD Front Mask for HERO5

(*1)
When using on land, set FOV mode other than [Wide] or use without this product to prevent vignetting observed mainly in ultra wide mode even without an attachment lens. (No vignetting underwater)

(*2)
This lens is designed only for underwater use. (When using on land, distant subject is not in focus and angle of view is not as wide as rated)

(*3)
This lens is designed only for underwater use. (When using on land with FOV setting [WIDE], vignetting will be observed)

(*4)
Not usable for [SuperView™ mode] as this mode adds software-based deformation effect enhancing more aberrations when using an attachment lens.

Front / Back / Bottom of the SD Front Mask for HERO5


Combination example with
"Direct Base III", "Z Joint", "Z Adapter MV", "Male Adapter (packaged)", and "Mount Adapter (packaged)" (from left)



■ Set-up Example ■



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5
•UFL-G140 SD
•Direct Base III
•Clamp III
•Carbon Telescopic Arm S



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5 + Mount Adapter (packaged)
•UCL-G165 SD
•D Holder



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5 + Mount Adapter (packaged)
•UFL-G140 SD
•Grip Base D4
•D Holder



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5 + Mount Adapter (packaged)
•UFL-G140 SD
•D Holder
•Direct Base YS RT
•Single Light Holder LF
•LF3100-EW (*upcoming product)



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5
•UFL-G140 SD
•Z Joint
•Direct Base YS RT
•Weight Plate (Screw)
•Diving weight



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5
•UFL-G140 SD
•Z Joint
•Shoe Base
•Olympus PT-EP14, 60mm Macro Set



•GoPro® HERO5 BLACK, genuine dive housing
•SD Front Mask for HERO5
•UFL-G140 SD
•Float Arm S x 2
•Stick Arm M x 2
•Clamp III x 4
•M6 Joint x 2
•Direct Base YS RT x 2
•Single Light Holder LF
•LF3100-EW (*upcoming product)




■ Relative Information on INON Website ■

•UFL-G140 SD Underwater Semi-fisheye Conversion Lens
http://www.inon.jp/products/gopro/uflg140sd.html

•UCL-G165 SD Underwater Wide Close-up Lens
http://www.inon.jp/products/gopro/uclg165sd.html

•Arm System
http://www.inon.jp/products/armsystem/lineup.html

•LED Light
http://www.inon.jp/products/le_light/lineup.html


* GOPRO, HERO, SuperView are trademarks or registered trademarks of GoPro, Inc.



July 11, 2017
INON INC.

Labels

Canon (25) INON (23) WideConversion (20) Olympus (19) Optical Cable (17) LED (15) X-2 (15) Closeup (12) Housing (12) Panasonic (12) DomeLens (11) UFL-M150ZM80 (11) 28LD (10) PowerShot (10) UWL-H100 (10) GoPro (9) Z-240 (9) Arm (8) D-2000 (8) LUMIX (8) M67 Lens Adapter Base (8) MountBase (8) Port (7) GF1 (6) GF2 (6) Grip Base (6) Lens (6) EOS (5) UWL-S100 ZM80 (5) sony (5) Flashlight (4) Fujifilm (4) Ikelite (4) LD Lens Adapter Base (4) Nikon (4) OM-D (4) S-2000 (4) UCL-100 (4) UCL-165LD (4) YS Adapter (4) 40D (3) 50D (3) Bug eye (3) Color temp (3) Diffuser (3) Direct Base (3) Fisheye (3) PowerShot S100 (3) Tripod (3) Zoom Gear (3) 60D (2) Action Camera (2) Carbon (2) FT3 (2) FXF500 (2) Micro Fisheye (2) Multi Ball (2) Pancake (2) S95 (2) Shoe Base (2) Type L (2) Z Adapter (2) insect-eye (2) 28M67 (1) Arm. Stick (1) Cap (1) DC43 (1) E-M5 (1) E-PL2 (1) G10 (1) G11 (1) G12 (1) G15 (1) HERO (1) HERO3 (1) HERO3+ (1) J2 (1) LD (1) LE250 (1) PT-050 (1) PT-EP03 (1) Stick (1) TG-1 (1) TG-610 (1) TG-810 (1) TG-820 (1) TZ20 (1) Torch (1) Type4 (1) UCL-G165 SD (1) UFL-G140 SD (1) VideoBase (1) WP-N1 (1) XZ-1 (1) iVIS (1) strobe (1) wireless connection (1)